The Lexmoto LXR 125 is a motorcycle that can be found in the urban areas of North America and Europe. It is the perfect form of transportation for those who want to save on gas and don’t mind having a little less power than most other motorcycles on the road. The Lexmoto LXR 125 ranges in price from $1,400-$2,000 and has an estimated fuel efficiency of 60mpg.

The LXR 125 is pretty simple to work on, but some people can still get intimidated when it comes to motorcycles. There are not very many parts that make up this vehicle; the entire thing weighs only 150 pounds which makes carrying tools up and down steps much more manageable.

This motorcycle has an air-cooled engine that allows for easy starting in colder weather and a small frame that can fit in the back of a station wagon. There are only six things you need to do when maintaining your LXR, including changing the engine oil, adjusting the spark plug gap, replacing a missing or damaged kickstand spring, checking for fuel leaks, and tightening any loose fasteners.

Maintaining your Lexmoto 125

There are only six things you need to do when maintaining your LXR, including changing the engine oil, adjusting the spark plug gap, replacing a missing or damaged kickstand spring, checking for fuel leaks, and tightening any loose fasteners.

The sharp edges of the Lexmoto LXR 125’s exhaust pipe often catch on ground obstacles that other motorcycles slide over. This causes wear and tears on the exhaust pipe, which will eventually cause a hole to form.

Repairing this is easy if you have some metal putty around. Just apply it to the damaged area and let it dry for a minute or two. Once it has dried simply file down any excess that may remain until you can’t see it anymore.

What are some Lexmoto LXR 125 problems customers have encountered?

Though the Lexmoto LXR 125 is perfect for beginners, they can run into many problems due to their lack of experience. A common problem that most motorcycle riders face is over-accelerating which usually ends up with them laying their moped down on its side.

This could lead to broken levers, scratches on the gasoline tank, and bruises from the impact of landing on your hip or elbow.

Another common Lexmoto LXR 125 problems that most owners encounter include trouble with the brake light wiring, making a rattling sound when starting up, and speeding up when shifting gears. Another problem is the kickstand; which doesn’t work too well due to its lack of spring action (if not adjusted properly). These are all easy fixes, you simply need time and patience to make sure everything is in working order before taking it out on the road!

How to check oil level on lexmoto lxr 125?

To check your oil level, you will need to locate your Lexmoto LXR 125’s oil tank (it should be something that looks like an upside down triangle). The cap for this usually says ‘engine oil’ or you might just see a picture of a triangle with the word ‘oil’ next to it.

After removing the cap from the top of it, place your dipstick into the tube and pull out once more. Make sure that there isn’t any dirt left behind before checking if your moped needs any extra or different oil levels.

Once you have checked your engine oil level, replace the cap onto the top of the oil tank. You can then start your engine and let it warm up for a few minutes before shutting it off again. Once you have done this, take out the dipstick one more time to get an accurate reading of how high or low your moped’s oil level is at. It needs to be between the two lines on the stick in order to be considered good.

Is a Lexmoto LXR 125 restricted?

In some countries, the Lexmoto LXR 125 is only restricted to a certain speed limit.

How to destrict your lexmoto lxr 125?

You need to adjust the spark plugs on your Lexmoto LXR 125. You can find these under the gas tank of the moped, labeled as ‘spark plugs.’ To do this first you will have to remove some sort of covering from them so you are able to access them. This is simply done by removing a plastic or metal cap. Once you have done this, you must give them another look over to make sure that they are the right ones for your moped.

Once you’ve checked out the spark plugs and made sure they are fine; all you will do is turn each one of them one-quarter turn counterclockwise (to the left). You want to tighten them, but you still want some wiggle room. You can typically get away with anywhere between 3/4 of a turn to one full turn on each spark plug.

How fast is a Lexmoto LXR 125?

The Lexmoto LXR 125 usually goes anywhere from 30-45mph. For experienced riders this is no problem, however, for beginners, it is a whole other animal. Their lack of experience and knowledge on how to properly operate this machine puts them at risk for disaster (such as over-accelerating and tipping over).

How do you remove and replace a Lexmoto LXR 125 kickstand spring?

Kickstand springs come in different shapes and sizes, depending upon the model of your Lexmoto LXR 125. For most of them, it is quite easy to remove and replace. With some models, you might need to take off more parts in order to get the kickstand spring off (which can be a pain).

You will then want to put on the new kickstand spring, making sure that it is in the right place. Make sure not to put on too much or too little tension when doing this since it has a direct result on how well your kickstand will work!

Which lexmoto 125 is the fastest?

The Lexmoto LXR 125 is the fastest due to its lightweight and power. It can go anywhere from 35-45 mph (depending upon which model you have, there are different versions out there).

Who makes the engines for Lexmoto?

These are Chinese engines made by QLink (QLink owns the brand name Lexmoto)

Does the Lexmoto LXR 125 have abs?

No, the Lexmoto LXR 125 does not have ABS (Anti-Lock Brakes System). This means that when you are riding this moped and applying the brakes, your stopping power will be less than what you would get with ABS. However, if you want to get ABS for your Lexmoto LXR 125 there is a company called ‘Motus global’ that makes an aftermarket kit.

What is the battery life for Lexmoto LXR 125?

The battery life on all Lexmoto mopeds is about 6-8 months, depending upon how often you ride it and where you live (for example, if you live in a colder climate then you will have to deal with smaller battery life). You can replace the batteries, but it is much easier and more convenient to just buy a new moped when your battery dies.

How many gears does a Lexmoto LXR 125 have?

The Lexmoto LXR 125 has 4 gears total (1-4), however, depending upon the model you have it might have 5 gears or 3 gears. For example, some LXR 125 models have an automatic clutch where you don’t have to change gears – you just twist the throttle and go!

Is Lexmoto Chinese?

Yes, the Lexmoto LXR 125 is a Chinese brand and made in China. However, for those who do not know enough about economics or globalization you might consider this fact as somewhat anti-Chinese/anti-foreign (which it isn’t).

The reason why manufacturers such as Lexmoto exist is that they give people all over the world a chance to own a motorcycle at extremely low prices. If it wasn’t for these foreign manufacturers, Chinese citizens would not be able to afford their own motorcycles!

What oil does a Lexmoto LXR 125 take?

The oil that you should use for your Lexmoto LXR 125 must be SAE 10W-30. Make sure not to put in any other type or viscosity since it can damage your engine!

Where is the battery on a Lexmoto LXR?

The battery for a Lexmoto LXR 125 can be found underneath the seat, in front of the gas tank. There is a cover over it so you have to take that off before being able to access it – it makes changing your battery much easier.

Author

Write A Comment